manualshive.com logo in svg

HP Adaptive Rack Cooling System, Руководство по установке системы, Страница: 29 / 50

Поделиться
Скачать
HP Adaptive Rack Cooling System Скачать руководство пользователя страница 29

Item

Description

3

4 "Panel C" side panel blanks for the front
extension

4

4 "Panel A" side panel blanks for the front
extension

NOTE: 

You also need the HPE ARCS 42U Air Rack Installation Kit to complete the panel installation. For

more information on the HPE ARCS 42U & 48U Air Rack Installation Kit contents, see 

Accessory and

option kit contents

.

To install the front extension side panel blanks:

1.

Place the blank against the IT rack, and line up the screw holes.

2.

Install four screws to hold the blank in place.

3.

Repeat steps 1 and 2 for each additional front extension side panel blank.

To install the side panel blanks:

NOTE: 

If the HPE Adaptive Rack Cooling System is at the end of the row, side panel blanks must be

installed from the outside, as shown in the previous illustration.

1.

From the inside of the HPE Adaptive Rack Cooling System, place the blank against the IT rack, and
line up the screw holes.

2.

Install three screws to hold the blank in place.

Configuration

29

Содержание Adaptive Rack Cooling System



















































Отзывы:

Нет отзывов