HP UPS Management Module web interface 67
SNMP Traps tab
This screen enables administrators to configure SNMP trap event notifications.
To configure the SNMP trap notifications:
1.
Enable SNMP traps for up to 10 servers.
2.
Enter the IP address for up to 10 trap recipients in the IP Address field.
3.
Do one of the following:
o
Click
Save Settings
to save the information.
o
Click
Undo Changes
to undo the changes.
o
Click
Help
to view online help.
4.
Click
Send Test Trap
to send a test SNMP trap.
Attached Devices menu
Click
Attached Devices
in the left navigation frame to display the Attached Devices screen. This screen
enables administrators to manage attached devices.
NOTE:
Depending on the specific UPS model, this screen will vary.
Содержание A1353A
Страница 1: ...HP UPS Management Module User Guide Part Number 435656 002 September 2007 Second Edition ...
Страница 25: ...Installing the HP UPS Management Module 25 5 Press the Reset button on the management module front panel ...
Страница 103: ...Regulatory compliance notices 103 Japanese notice BSMI notice ...
