HP a-msr Скачать руководство пользователя страница 65

Страница: 65 / 73

Figure 26

Network diagram for CAC service configuration

Configuration procedure

# Configure interface WLAN-BSS 1 to use the 802.11e priority of received packets for priority mapping.

<Sysname> system-view

[Sysname] interface wlan-bss 1

[Sysname-WLAN-BSS1] qos trust dot11e

[Sysname-WLAN-BSS1] quit

# Configure interface Ethernet 1/0 to use the 802.1p priority of received packets for priority mapping.

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] qos trust dot1p

[Sysname-Ethernet1/0] quit

# Create a clear-type WLAN service template, configure its SSID as

market

, configure its authentication

method as Open System, and then enable the WLAN service template.

[Sysname] wlan service-template 1 clear

[Sysname-wlan-st-1] ssid market

[Sysname-wlan-st-1] authentication-method open-system

[Sysname-wlan-st-1] service-template enable

# Configure the radio type as 802.11g for radio interface WLAN-Radio 2/0, and map service template 1 to
interface WLAN-BSS1 on the radio interface.

[Sysname] interface wlan-radio 2/0

[Sysname-WLAN-Radio2/02] radio-type dot11g

[Sysname-WLAN-Radio2/0] service-template 1 interface wlan-bss 1

# Configure radio interface WLAN-radio 2/0 to allow up to ten users to use high-priority AC queues
(including AC-VO and AC-VI queues).

[Sysname-WLAN-Radio2/0] wmm edca client ac-vo cac

[Sysname-WLAN-Radio2/0] wmm edca client ac-vi cac

[Sysname-WLAN-Radio2/0] wmm cac policy users 10

[Sysname-WLAN-Radio2/0] wmm enable

[Sysname-WLAN-Radio2/0] quit

If a client wants to use a high-priority AC queue (AC-VO or AC-VI queue), it must send a request to the AP.
If the number of clients using high-priority AC queues (including AC-VO and AC-VI queues) plus the clients

IP network

L2 Switch

FAT AP

Client

Содержание a-msr










































































Результаты поиска

Содержание a-msr

Отзывы:

Похожие инструкции для a-msr

Бренды по названию

Популярные бренды

HP a-msr, Руководство по настройке

Результаты поиска

Содержание a-msr

Отзывы:

Похожие инструкции для a-msr

Бренды по названию

Популярные бренды