HP a-msr, Руководство по настройке

Страница: 5 / 73

1
WLAN interface configuration
The terms AP and fat AP in this document refer to A-MSR900 and A-MSR20-1X routers with IEEE 802.11b/g
and A-MSR series routers installed with a SIC WLAN module.
Wireless routers support WLAN-Radio interfaces, which are physical interfaces that provide wireless network
access.
Wireless routers support WLAN-BSS and WLAN-Ethernet virtual interfaces. Use WLAN-Radio interfaces on
routers as common physical access interfaces. You can bind them to WLAN-BSS interfaces and
WLAN-Ethernet interfaces.
WLAN-radio interface
WLAN-Radio interfaces are physical interfaces used to provide wireless access service. You can configure
them, but you cannot remove them manually.
Configuring a WLAN-radio interface
To configure a WLAN-radio interface:
To do… Use the Command… Remarks
1. Enter system view.
system-view —
2. Enter WLAN-radio interface
view.
interface wlan-radio
interface-number
Required.
3. Set the description for the
interface.
description text
Optional.
By default, the description string of
an interface is
interface-name +
Interface .
4. Restore the default settings of
the WLAN-radio interface.
default Optional.
5. Shut down the WLAN-radio
interface.
shutdown
Optional.
By default, a WLAN-Radio
interface is up.
WLAN-BSS interface
WLAN-BSS interfaces are virtual Layer 2 interfaces. They operate like Layer 2 Ethernet ports of the access
link type. A WLAN-BSS interface supports multiple Layer 2 protocols. On a wireless router, a WLAN-Radio
interface bound to a WLAN-BSS interface operates as a Layer 2 interface.
Configuring a WLAN-BSS interface
To configure a WLAN-BSS interface: