HP a-msr, Руководство по настройке

Страница: 20 / 73

16
To do… Use the command… Remarks
2. Enter radio interface view.
interface wlan-radio
interface-number
—
3. Specify a radio type for the
radio.
radio-type [ type { dot11b | dot11g |
dot11gn } ]
Required.
4. Bind a service template to a
WLAN-ESS interface for the
radio.
service-template
service-template-number interface
wlan-bss interface-number
Required.
5. Specify a working channel for
the radio.
channel { channel-number | auto }
Optional.
By default, auto mode is enabled.
The working channel of a radio
varies with country codes and
radio types. The channel list
depends on your device model.
6. Specify the maximum radio
power.
max-power radio-power
Optional.
By default, the maximum radio
power varies with country codes,
channels, AP models, radio types
and antenna types. If 802.11n is
adopted, the maximum radio
power also depends on the
bandwidth mode.
7. Specify the type of preamble.
preamble { long | short }
Optional.
By default, the short preamble is
supported.
This command does not apply to
802.11a radios.
Configuring the radio of the AP
To configure the radio of the AP:
To do… Use the command… Remarks
1. Enter system view.
system-view —
2. Enter radio view.
interface wlan-radio radio-number Required.
3. Set the interval for sending
beacon frames.
beacon-interval interval
Optional.
By default, the beacon interval is
100 TUs.
4. Set the DTIM counter for
beacon frames.
dtim counter
Optional.
By default, the DTIM counter is 1.
5. Set the fragment threshold.
fragment-threshold size
Optional.
By default, the fragment threshold
is 2346 bytes and must be an
even number.