HP 85108, Системное руководство

Страница: 79 / 136

7. Be sure the computer is connected to the HP 8510.
8.
Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
VERIFY SYSTEM . If the program ac kno wledges the system o v er the HP-IB, it will
display the System P erformance V erication Men u on the computer.
9.
Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SERIAL NUMBERS . En ter the serial n um b ers and the National Institute of Standards
and T ec hnology (NIST) n um b ers only if y ou w an t them to app ear on the prin tout of
y our p erformance test results for eac h v erication device. The serial n um b ers of the
instrumen ts are usually lo cated on the rear panels. NIST test n um b ers are on the
Certicate of Calibration that accompanies y our v erication kit.
When y ou are nished with this men u, press
NNNNNNNNNNNNNN
DONE .
10. Y ou should no w b e bac k in the System P erformance V erication Men u. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SYSTEM CAL . The conguration information will b e display ed; make sure it agrees with
the system y ou are going to v erify . If it do es, press
NNNNNNNNNNNNNNNNNNNN
RESUME to con tinue. If it do es not,
press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PRIOR MENU to return to the Hardw are Conguration Men u and correct it.
Measurement Calibration
1. Connect the test p ort cables as directed b y the softw are.
2. Load the HP 85108 system conguration disk.
Note
HP 8510B Netw ork Analyzer The conguration disk les are not compatible
with the HP 8510B net w ork analyzer. Instead, set the hardw are and
instrumen t states in App endix B man ually and then sa v e in instrumen t state
register n um b er 8 b y pressing
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
INSTRUMENT STATE SAVE
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
USER PRESET *8 .
Insert the disk in to the disk driv e on the net w ork analyzer. Press DISC
NNNNNNNNNNNNNN
LOAD
NNNNNNNNNNNNNN
MORE
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MACHINE DUMP . Use RPG knob on the net w ork analyzer to select le: MD PULS. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOAD FILE . The net w ork analyzer will load le in to the eigh t instrumen t state registers
and one hardw are state register, then set the hardw are state and recall instrumen t state
register eigh t.
3. Load the Cal Kit Disk as follo ws:
Insert the standards denition disk and press 4
DISC
5 ,
NNNNNNNNNNNNNN
LOAD ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CAL KIT [1-2] . Then press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CAL KIT*1 . Mov e the knob to the desired le (to match the calibration kit y ou are using)
and press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOAD FILE . After the disk is loaded, remov e it from the disk driv e.
4. Press 4 CAL 5 to v erify that the prop er les w ere loaded. The HP 8510 softkey eld should
display the t yp e of calibration and the revision n um b er of the cal kit disk.
5.
Press
NNNNNNNNNNNNNNNNNNNN
RESUME .
Specifications and P erformance V erification 4-7