HP 85027A/B/C Replaceable Parts
SECTION 6
REPLACEABLE PARTS
INTRODUCTION
This section contains information for ordering parts. Table 6-1 lists the exchange assem-
blies available. Table 6-2 lists (1) the names and addresses of manufacturers which cor-
respond to the manufacturers’ code numbers and (2) reference dçsignator definitions and
abbreviations used in the replaceable parts list. Tables 6-3A, 6-3B and 6-3C are the re-
placeable parts lists for the HP 85027A, 85027B and 85027C respectively. They list the
replaceable parts in reference designator order. Table 6-4 lists the replaceable pai-ts of
A2 Circuit Board, common to all three bridges.
Figui-es 6-lA, 6-lB and 6-iC show the major assembly and miscellaneous parts locations
for the 3 bridges. The circuit board assembly (A2) for all 3 bridges is the same. Figure
6-2 shows the component side, Figure 6-3 shows the solder side, Table 6-2 lists its re-
placeable parts.
EXCHANGE ASSEMBLIES
You may replace, on an exchange basis, the bridge microcircuit assembly and realize a
considerable cost saving. This assembly includes the input and test port connectors and
the reference termination. Table 6-i lists these factory repaired and tested assemblies
and theii- HP part numbers. The defective assemblies must be returned for credit to
m~ealizethe cost savings. Thus, assemblies required for spare parts stock must be ordered
by the new assembly part number.
REPLACEABLE PARTS LIST
Organization
Table 6-3 is the list of replaceable parts and is organized as follows:
a.
Electrical assemblies and their components in alpha-numerical oi-der by reference
designation.
b.
Major assemblies and cables.
c.
Options.
d.
Miscellaneous (including mechanical and attaching hardware) parts.
Information
The following information is tabulated for each entry:
a.
The Hewlett-Packard part number.
b.
The part number check digit (CD).
c.
The total quantity (Qty) in the instrument or, if accompanied by an illustration,
the total quantity illustrated therein.
d.
The description of the part.
6-i
