HP 84125C, Руководство пользователя

Страница: 83 / 101

Note
If you want to recover a data point that has been deleted, you can
Exit the Antenna Correction F actors window without saving the
antenna factors . Then, re-enter the Antenna Correction F actors
window and start editing again. Once you Save the factors , the old
data cannot be recovered unless you have backed up the les .
A dd P oint Button
The A dd P oint button adds a new frequency-correction point to
the end of the list in the Antenna Data area. Y ou may then edit
that point. Changing the frequency of the point will move it to the
appropriate location in the list.
Save Button
The Save button saves the antenna correction factor points in the
appropriate le .
Exit Button
The Exit button exits the Antenna Correction F actors window . Use
the Save button to save any changes you have made prior to exiting.
GPIB Conguration Window
The GPIB Conguration window is used to select the card type , card
address and the spectrum analyzer address .
GPIB Interface Card Selection Area
The GPIB Interface Card Selection area is used to select the type of
interface card installed in the P ersonal Computer .
National GPIB/HPIB A ddress Area
The National GPIB/HPIB A ddress area is used to select the card
type for either the GPIB or HP-IB card, and also the address of the
spectrum analyzer .
Card T ext Box
The Card text box is used to select the card type for GPIB or HP-IB
interface cards .
A T-GPIB cards will most likely be set to \0". T o verify this setting,
use one of the following procedures:
Windows 3.1
From the Main group icon, double-click on Control P anel, then
GPIB . V erify that GPIB0 is highlighted in the GPIB Board list box.
F or Windows 95
From the Start menu, click on Settings , Control P anel, then GPIB .
V erify that GPIB0 is highlighted in the GPIB Board list box.
HP-IB cards will most likely be set to the default I/O conguration
setting of HPIB7. T o verify this setting, use one of the following
procedures:
7-12 Using the HP 84125C Utility