manualshive.com logo in svg

HP 6530b - Compaq Business Notebook, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 6530b - Compaq Business Notebook Скачать руководство пользователя страница 154

Recovering information using a Windows Vista operating

system DVD (purchased separately)

If you are unable to boot (start up) your computer, you must purchase a Windows Vista operating system
DVD to reboot the computer and repair the operating system. Make sure that your most recent backup
(stored on discs or on an external drive) is easily accessible. To order a Windows Vista operating system
DVD, go to 

http://www.hp.com/support

, select your country or region, and follow the on-screen

instructions. You can also order the DVD by calling technical support. For contact information, refer to
the Worldwide Telephone Numbers booklet included with the computer.

CAUTION:

Using a Windows Vista operating system DVD will completely erase hard drive contents

and reformat the hard drive. All files you have created and any software installed on the computer will
be permanently removed. When reformatting is complete, the recovery process will help you restore the
operating system, as well as drivers, software, and utilities.

To initiate recovery using a Windows Vista operating system DVD, follow these steps:

NOTE:

This process will take several minutes.

1.

If possible, back up all personal files.

2.

Restart the computer, and then insert the Windows Vista operating system DVD into the optical
drive before the Windows operating system loads.

3.

When prompted, press any keyboard key.

4.

Follow the on-screen instructions.

5.

Click 

Next

.

6.

Select 

Repair your computer

.

7.

Follow the on-screen instructions.

146 Chapter 8   Backup and recovery

Содержание 6530b - Compaq Business Notebook
















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды