HP 6520s - Notebook PC Скачать руководство пользователя страница 90

Страница: 90 / 154

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.

NOTE:

Some of the Computer Setup menu items listed in this chapter may not be supported by your

computer.

File menu

Select

To do this

System information

●

View identification information for the computer and the batteries in the system.

●

View specification information for the processor, cache and memory size,

system ROM, video revision, and keyboard controller version.

Restore defaults

Replace the configuration settings in Computer Setup with the original factory

settings. (Password settings and security settings are not changed when you restore

the factory settings.)

Ignore changes and exit

Cancel any changes entered during the current session. Then exit and restart the

computer.

Save changes and exit

Save any changes entered during the current session. Then exit and restart the

computer. Your changes go into effect when the computer restarts.

82 Chapter

Computer Setup

Содержание 6520s - Notebook PC



























































































































































Результаты поиска

Содержание 6520s - Notebook PC

Отзывы:

HP 6520s - Notebook PC, Руководство по техническому обслуживанию и ремонту, Страница: 90 / 154

Результаты поиска

Содержание 6520s - Notebook PC

Отзывы: