HP 6520s - Notebook PC Скачать руководство пользователя страница 50

Страница: 50 / 154

Lift the right side of the WLAN module compartment cover

(2)

, swing it to left, and remove the cover.

The WLAN module compartment cover is included in the Plastics Kit, spare part number

456614-001.

Disconnect the WLAN antenna cables

(1)

from the terminals on the WLAN module.

NOTE:

The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The

white WLAN antenna cable is connected to the WLAN module “Aux” terminal.

Remove the two Phillips PM2.5×4.0 screws

(2)

that secure the WLAN module to the computer. (The

edge of the module opposite the slot rises away from the computer.)

Remove the WLAN module

(3)

by pulling the module away from the slot at an angle.

NOTE:

WLAN modules are designed with a notch

(4)

to prevent incorrect installation.

Reverse this procedure to install the WLAN module.

42 Chapter

Removal and replacement procedures

Содержание 6520s - Notebook PC



























































































































































Результаты поиска

Содержание 6520s - Notebook PC

Отзывы:

HP 6520s - Notebook PC, Руководство по техническому обслуживанию и ремонту, Страница: 50 / 154

Результаты поиска

Содержание 6520s - Notebook PC

Отзывы: