HP 6520s - Notebook PC, Руководство по техническому обслуживанию и ремонту, Страница: 53 / 154

Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel.
Description Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe 456799-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 456798-001
DVD/CD-RW Combo Drive 456797-001
Before removing the optical drive, follow these steps:
1
. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
. Disconnect all external devices connected to the computer.
3
. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see Battery on page 37 ).
Remove the optical drive:
1
. Position the computer with the right side toward you.
2
. Remove the Torx T8M2.5×7.0 screw (1) that secures the optical drive to the computer.
3
. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab
to the left to release the optical drive from the computer.
4
. Remove the optical drive (3) from the computer.
5
. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward
you.
6
. Remove the two Phillips PM2.0×4.0 screws (1) that secure the optical drive bracket to the optical
drive.
Component replacement procedures 45