HP 6520s - Notebook PC Скачать руководство пользователя страница 3

Страница: 3 / 154

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a

hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft

surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact

the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC

adapter comply with the user-accessible surface temperature limits defined by the International Standard

for Safety of Information Technology Equipment (IEC 60950).

iii

Содержание 6520s - Notebook PC



























































































































































Результаты поиска

Содержание 6520s - Notebook PC

Отзывы:

HP 6520s - Notebook PC, Руководство по техническому обслуживанию и ремонту, Страница: 3 / 154

Результаты поиска

Содержание 6520s - Notebook PC

Отзывы: