HP 64146A, Руководство пользователя

Страница: 63 / 112

External Analyzer Configuration: See the Analyzer Softkey
Interface User’s Guide.
General Emulator
Configuration
The configuration questions described in this section involve general
emulator operation.
Micro-processor
clock source?
This configuration question allows you to select whether the emulator
will be clocked by the internal clock source or by a target system clock
source.
internal Selects the internal clock oscillator as the emulator
clock source. The internal clock is provided from
the emulation pod. In the case of HP 64146-61001
or HP 64146-61602 emulation pod, the clock speed
is 1 MHz. When you use an emulation pod with
clock faster than 16 MHz, you need to select the
high speed access mode to run the emulator with no
wait state. If the high speed access mode is not
selected, one wait state is inserted by the emulator.
external Selects the clock input to the emulator probe from
the target system. You must use a clock input
conforming to the specifications for the 7700 Series
microprocessor. The HP 64146A/B emulator runs
with no wait state with target system clock up to 16
MHz. When clock is faster than 16 MHz, you need
to select the high speed access mode to run the
emulator with no wait state. If the high speed
access mode is not selected, one wait state is
inserted by the emulator.
Configuring the Emulator 4-3