background image

 

219 

    Total 1 IP Group(s). 

    Total 1 IP Source(s). 

    Total 1 MAC Group(s). 

    Router port(s):total 1 port(s). 

            GE1/0/1                (D) ( 00:01:30 ) 

    IP group(s):the following ip group(s) match to one mac group. 

      IP group address:FF1E::101 

        (::, FF1E::101): 

          Attribute:    Host Port 

          Host port(s):total 1 port(s). 

            GE1/0/2                (D) ( 00:03:23 ) 

    MAC group(s): 

        MAC group address:3333-0000-0101 

          Host port(s):total 1 port(s). 

            GE1/0/2 

Table 48

 

Command output 

Field Description 

Total 1 IP Group(s). 

Total number of IPv6 multicast groups. 

Total 1 IP Source(s). 

Total number of IPv6 multicast sources. 

Total 1 MAC Group(s). 

Total number of MAC multicast groups. 

Port flags: D-Dynamic port, 
S-Static port, C-Copy port, P-PIM 

port 

Port flags:  

D

—Dynamic port. 

S

—Static port. 

C

—Port copied from a (*, G) entry to an (S, G) entry. 

P

—Port that IPv6 PIM snooping adds.  

Subvlan flags: R-Real VLAN, 
C-Copy VLAN 

Sub-VLAN flags:  

R

—Real egress sub-VLAN under the current entry.  

C

—Sub-VLAN copied from a (*, G) entry to an (S, G) entry.  

Router port(s) 

Number of router ports. 

( 00:01:30 ) 

Remaining time of the aging timer for the dynamic member port or router 
port.  

IP group address 

Address of IPv6 multicast group. 

(::, FF1E::101) 

(S, G) entry, double colon represents all the multicast sources. 

MAC group address 

Address of MAC multicast group. 

Attribute 

Attribute of IPv6 multicast group. 

Host port(s) 

Number of member ports. 

 

display mld-snooping host 

Syntax 

display mld-snooping host vlan

 

vlan-id

 

group

 

ipv6-group-address

 [ 

source

 

ipv6-source-address

 ] [ 

slot

 

slot-number

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

Содержание 6125G











































































































































































































































































































































































































































Отзывы: