manualshive.com logo in svg

HP 600 Series, Услуги и приложения

Серия Jacobsen 600 предлагает бесплатное скачивание руководств по монтажу для вашего удобства. Посетите {сайт} и загрузите свои инструкции сейчас. Получите подробные инструкции по установке, чтобы правильно собрать свой продукт Jacobsen 600. Начните использовать свой товар мгновенно с нашими руководствами.

Поделиться
Скачать
background image

over the secondary multicast address. See “Probe Proxy Request/Reply”
below for more information.

Node B responds to the name request with a path report that contains the IP
and link-level station (MAC) addresses of the target node. The station
address in the response received from the target node will only be consid-
ered valid if the IP or network numbers are the same as the originator’s. If
they are not, then the originator must still resolve the IP-to-station-address
mapping. It does this with a Probe Virtual Address Request (VNA), as
described in the next section. If a proxy server replies to the request, it may
fill in the station address field with a null address or all zeros to ensure the
requester generates a VNA for the correct station address.

Probe Virtual Address Request/Reply - VNA

This is the equivalent to ARP in the NS world. It provides for the mapping of
a network (IP) address to link-level station address. The router will generate
a VNA when it needs to forward IP packets to an NS node and there is no
entry for it in its ARP cache. The router will have the destination IP address
and requires the station address in order to forward the packet. The target
node responds to the request with a path report that contains its station
address. The router then forwards the IP packet onto the destination NS
node. The router will respond to nodes generating these requests for
destination networks known to it.

Probe Proxy Request/Reply

The proxy request packet is basically the same as the name request 
(see “Probe Name Request/Reply”), except that it is sent out over the
secondary multicast address. The secondary multicast address is listened to
only by Probe proxy nodes or servers. Proxy servers contain a database of
name-to-IP-address mappings for some or all of the nodes in the network.
The server will answer the requests for nodes that are on different subnets,
or for local nodes that cannot respond to name requests, with the IP address
from the database.

R

o

u

ti

n

g

 S

e

r

v

ic

e

s

N

o

te

s

2

A Primer on HP Probe 

HP Probe Protocol Definition

2-127

Содержание 600 Series





























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 600 Series

Panasonic KX-FPG175 Description preview
KX-FPG175
Бренд: Panasonic Страницы: 2
Fellowes PB100 Operating Instructions preview
PB100
Бренд: Fellowes Страницы: 4
Ultraflex Easy Melt Air 1G Operation Manual preview
Easy Melt Air 1G
Бренд: Ultraflex Страницы: 22
Jack JK-58420J Manual Book & Parts Book preview
JK-58420J
Бренд: Jack Страницы: 23
NCL 13” Blazer MP Owner'S Manual preview
13” Blazer MP
Бренд: NCL Страницы: 8
Kärcher K 70/30 Bp Pack Adv. Manual preview
K 70/30 Bp Pack Adv.
Бренд: Kärcher Страницы: 28
JUKI DDL-5550N Specifications preview
DDL-5550N
Бренд: JUKI Страницы: 4
Brother FA-V71A Instruction Manual preview
FA-V71A
Бренд: Brother Страницы: 16
Brother FA-V81A Parts Manual preview
FA-V81A
Бренд: Brother Страницы: 60
Brother EXEDRA E-40 Instruction Manual preview
EXEDRA E-40
Бренд: Brother Страницы: 19
Brother Entrepreneur Pro PR1050X Quick Reference Manual preview
Entrepreneur Pro PR1050X
Бренд: Brother Страницы: 12
Brother Entrepreneur W PR680W Manual preview
Entrepreneur W PR680W
Бренд: Brother Страницы: 10
Brother FB-V61A Parts Manual preview
FB-V61A
Бренд: Brother Страницы: 66
Brother EPS-2200 Operation Manual preview
EPS-2200
Бренд: Brother Страницы: 93
Brother Electroknit KH-910 Service Manual preview
Electroknit KH-910
Бренд: Brother Страницы: 51
Brother Exedra DB2-B737 Instruction Manual preview
Exedra DB2-B737
Бренд: Brother Страницы: 94
Brother FD3-B251 Parts Manual preview
FD3-B251
Бренд: Brother Страницы: 127
Brother FD3-B256 Parts Manual preview
FD3-B256
Бренд: Brother Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды