HP 600 Series, Услуги и приложения

Страница: 135 / 316

Fields Operator Values Action
Destination
Address
= 192.32.165
Source
Address
= 128.16.4.100
DROP Filter Rule A
Port
Number
= 23
Fields Operator Values Action
Destination
Address
= 192.32.1.65
DROP Filter Rule B
Source
Address
= 128.10.10.10
Figure 13. Sample IP Filters
IP Filter Lists
Filter lists (while not required) may facilitate the
configuration of filters if you wish the filter to apply to non-contiguous
value ranges. A list specifies the filter values within a filter rule. The
elements of a list are a name to identify the list and one or more pairs of
numbers that specify a range. When a filter specifies a list name, packets
are checked against the range(s) of values specified by the list. Two
types of lists are defined for the two types of packet filters:
IP address lists specify ranges of IP network addresses. Specify the
lower and upper boundary of each IP address range to be in the list
(or just the lower address for a single value).
IP port lists specify ranges of TCP/UDP port numbers. Specify the
lower and upper boundary of each port range to be part of the list
(or just the lower port number for a single value).
R
o
u
ti
n
g
S
e
r
v
ic
e
s
N
o
te
s
2
Internet Protocol Routing Service
IP Filters
2-83