HP 54 Basic Cutter Скачать руководство пользователя страница 13

Страница: 13 / 58

Connect the other end of the cable to the USB port at the back of the cutter. This end of the cable should

have a 4-pin USB series B connector.

Turn on the cutter (see

Turn the cutter on and off on page 8

Most cutting software for Mac OS X can control the cutter without the installation of a driver.

Front panel

The front panel features eight command keys and a display area capable of displaying one line of text, which is

used to display menu options and status information.

A parameter or parameter value preceded by an asterisk (*) is the currently selected parameter or parameter

value. If you see a value displayed without an asterisk, it is not the saved value.

The various menu and submenu items are always presented in a loop, which means that, when the last menu or

submenu item is displayed, pressing the appropriate key will automatically take you back to the first item of the

same menu or submenu.

WARNING!

Whenever you press a key, it may initiate an internal test or movement of the head or substrate.

Keep fingers and other body parts away from the cutting area, where there are hazardous moving parts.

Keys

●

Press

to reach the most common menu items quickly.

●

Press

to read the HP barcode.

●

The use of the arrow keys

, and

depends on the context and what appears on the

screen.

●

Press

to cancel the current process.

●

Press

to confirm a selection or a changed value, or to start or pause a job.

ENWW

Front panel

Содержание 54 Basic Cutter



























































Результаты поиска

Содержание 54 Basic Cutter

Отзывы:

Похожие инструкции для 54 Basic Cutter

Бренды по названию

Популярные бренды

HP 54 Basic Cutter, Руководство пользователя

Результаты поиска

Содержание 54 Basic Cutter

Отзывы:

Похожие инструкции для 54 Basic Cutter

Бренды по названию

Популярные бренды