HP 41802A, Инструкция по эксплуатации, Страница: 35 / 50

4
P erformance T est
Introduction
This chapter provides performance test procedure to ensure that the HP 41802A meets the
specications listed in Figure 1-2 . The performance test can be performed without accessing
the interior of the HP 41802A.
The test results should be recorded into the P erformance T est Record which is located at the
end of this chapter .
Equipment Required
The equipment required for performance testing is listed in T able 4-1 . Substitutions can
be made if the substitution equipment meets or exceeds the specications listed in the
Requirements column.
T able 4-1. Recommended T est Equipment
Equipment Critical Specications Recommended Model Qty .
Network Analyzer No substitute HP 8751A or HP
4195A
1
P ower Splitter Frequency: 10 Hz to 100 MHz,
Equivalent Output SWR: 1.1
(@ 100 MHz)
HP 11667A 1
A dapter 50 , N(m)-N(m) PN 1250-0778 1
50 , N(m)-BNC(f) PN 1250-0780 2
Attenuator P ad A TT 10 dB ,
Impedance 50 , N(m)-N(f)
HP 8491A Opt. 010 1
A TT 20 dB , SWR: 1.2,
Impedance 50 , N(m)-N(f)
HP 8491A Opt. 020 1
Cables 50 , N(m)-N(m) HP 11500B 1
50 , BNC(m)-BNC(m), 30cm PN 8120-1838 1
Coaxial Load 50 F eed through, BNC(m)-BNC(f),
VSWR: 1.1 (@ 100 MHz)
HP 10100C 1
P erformance T est 4-1