HP 350 G1 Скачать руководство пользователя страница 137

Страница: 137 / 159

Using f11 recovery tools

CAUTION:

Using

f11

completely erases hard drive contents and reformats the hard drive. All files

that you have created and any software that you have installed on the computer are permanently

removed. The

f11

recovery tool reinstalls the operating system and HP programs and drivers that were

installed at the factory. Software not installed at the factory must be reinstalled.

To recover the original hard drive image using f11:

If possible, back up all personal files.

If possible, check for the presence of the HP Recovery partition: From the Start screen, type

and then select

This PC

NOTE:

If the Recovery Image partition is not listed, you must recover your operating system and

programs using the Windows 8 operating system media and the Driver Recovery media (both

purchased separately). For additional information, see

Using Windows operating system media

(purchased separately) on page 127

If the Recovery Image partition is listed, restart the computer, and then press

esc

while the “Press

the ESC key for Startup Menu” message is displayed at the bottom of the screen.

Press

f11

while the “Press <F11> for recovery” message is displayed on the screen.

Follow the on-screen instructions.

Using Windows operating system media (purchased separately)

To order a Windows operating system DVD, contact support. See the

Worldwide Telephone Numbers

booklet included with the computer. You can also find contact information from the HP website. Go to

http://www.hp.com/support

, select your country or region, and follow the on-screen instructions.

CAUTION:

Using a Windows operating system media completely erases hard drive contents and

reformats the hard drive. All files that you have created and any software that you have installed on the

computer are permanently removed. When reformatting is complete, the recovery process helps you

restore the operating system, as well as drivers, software, and utilities.

To initiate recovery using a Windows operating system DVD:

NOTE:

This process takes several minutes.

If possible, back up all personal files.

Insert the Windows operating system DVD into the optical drive, and then restart the computer.

When prompted, press any keyboard key.

Follow the on-screen instructions.

After the installation is completed:

Eject the Windows operating system media and then insert the

Driver Recovery

media.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Windows 8

127

Содержание 350 G1
































































































































































Результаты поиска

Содержание 350 G1

Отзывы:

Похожие инструкции для 350 G1

Бренды по названию

Популярные бренды

HP 350 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 350 G1

Отзывы:

Похожие инструкции для 350 G1

Бренды по названию

Популярные бренды