HP 350 G1 Скачать руководство пользователя страница 124

Страница: 124 / 159

Downloading a BIOS update for Windows 7

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the AC

adapter. Do not download or install a BIOS update while the computer is running on battery power,

docked in an optional docking device, or connected to an optional power source. During the

download and installation, follow these instructions:

Do not disconnect power on the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

Access Help and Support by selecting

Start > Help and Support

Select

Updates and tune-ups

, and then select

Check for HP updates now

At the download area, follow these steps:

Identify the most recent BIOS update and compare it to the BIOS version currently installed on

your computer. Make a note of the date, name, or other identifier. You may need this

information to locate the update later, after it has been downloaded to your hard drive.

Follow the on-screen instructions to download your selection to the hard drive.

If the update is more recent than your BIOS, make a note of the path to the location on your

hard drive where the BIOS update is downloaded. You will need to access this path when

you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the

download is complete. If no instructions are displayed, follow these steps:

Select

Start > Computer

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

114

Chapter 7 Computer Setup (BIOS)

Содержание 350 G1
































































































































































Результаты поиска

Содержание 350 G1

Отзывы:

Похожие инструкции для 350 G1

Бренды по названию

Популярные бренды

HP 350 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 350 G1

Отзывы:

Похожие инструкции для 350 G1

Бренды по названию

Популярные бренды