Remove the RTC battery:
1.
Turn the system board upside down with the front toward you.
2.
Use a plastic flat-bladed tool
(1)
to release the RTC battery
(2)
from the socket on the
system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery in the system board
socket, make sure the “+” is facing up.
Power connector cable
Description
Spare part number
Power connector cable
758054-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
Hard drive (see
c.
Optical drive (see
92
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание 350 G1
Страница 1: ...HP 355 G2 Notebook PC and HP 350 G1 Notebook PC Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 10: ...x ...
Страница 31: ...Computer major components Computer major components 21 ...