120
Figure 37 Network diagram
Configuration consideration
Create VLANs 100 and 200. Associate VLAN 100 with IPv4, and associate VLAN 200 with IPv6.
Configure protocol-based VLANs to isolate IPv4 traffic and IPv6 traffic at Layer 2.
Configuration procedure
1.
Configure Device:
# Create VLAN 100, and assign port Ethernet 1/0/11 to VLAN 100.
<Device> system-view
[Device] vlan 100
[Device-vlan100] description protocol VLAN for IPv4
[Device-vlan100] port ethernet 1/0/11
[Device-vlan100] quit
# Create VLAN 200, and assign port Ethernet 1/0/12 to VLAN 200.
[Device] vlan 200
[Device-vlan200] description protocol VLAN for IPv6
[Device-vlan200] port ethernet 1/0/12
# Create an IPv6 protocol template in the view of VLAN 200, and create an IPv4 protocol
template in the view of VLAN 100.
[Device-vlan200] protocol-vlan 1 ipv6
[Device-vlan200] quit
[Device] vlan 100
[Device-vlan100] protocol-vlan 1 ipv4
[Device-vlan100] quit
# Configure port Ethernet 1/0/1 as a hybrid port that forwards packets of VLANs 100 and 200
untagged.
[Device] interface ethernet 1/0/1
[Device-Ethernet1/0/1] port link-type hybrid
[Device-Ethernet1/0/1] port hybrid vlan 100 200 untagged