![HP 260 G1 Скачать руководство пользователя страница 31](http://html.mh-extra.com/html/hp/260-g1/260-g1_maintenance-and-service-manual_158072031.webp)
Replacing SODIMMs
CAUTION:
You must disconnect the power cord and wait approximately 30 seconds for the power to drain
before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to
the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing
memory modules while voltage is present may cause irreparable damage to the memory modules or system
board.
The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important
to use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting
from having incompatible metals in contact with each other.
Static electricity can damage the electronic components of the computer or optional cards. Before beginning
these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal
object.
When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the
module.
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 17
).
2.
Remove the access panel (
Access panel on page 18
).
3.
Pry up the edge of the memory door closest to the side of the computer and lift the door off the
computer.
Memory
23
Содержание 260 G1
Страница 1: ...Maintenance and Service Guide HP 260 G1 Desktop Mini PC ...
Страница 4: ...iv Safety warning notice ...