1-4. Product Description
The HP 16532A Oscilloscope Module is a 1 GSa/s
digitizing oscilloscope. Some of the main features
are:
•
1 GSa/s digitizing for 250 MHz bandwidth sin-
gle shot analysis.
•
8000 samples per channel.
•
Automatic pulse parameters, displays time be-
tween markers, acquires until specified time
between markers is captured, performs statis-
tical analysis on time between markers.
•
Lightweight miniprobes.
1-5. Accessories Supplied
The following accessories are supplied with the
HP 16532A Oscilloscope module. Quantity one
unless shown otherwise.
•
User’s Reference and Programming Refer-
ence set
•
Service Guide
•
HP 10441A 10:1 probes, Qty 2
•
Right angle BNC adapters, Qty 2
•
BNC miniprobe adapter
•
Master-slave trigger cable
•
Operating System Software
1-6. Accessories Available
•
10:1, 100:1, 50
Ω
, 10 pf resistive divider probe
set, 1.2 m (HP 10020A)
•
BNC-to-BNC cable, 1.2 m (HP 10503A)
•
24-pin IC test clip (HP 10211A)
•
BNC-to-BNC ac coupling capacitor
(HP 10240B)
10:1 Probe:
•
1-M
Ω
, 7.5-pf miniprobe, 1 m (HP 10435A)
1:1 Probes:
•
40-pf miniprobe, 1 m (HP 10438A)
•
64-pf miniprobe, 2 m (HP 10439A)
•
50-
Ω
miniprobe, 2 m (HP 10437A)
100:1 Probe:
•
10-M
Ω
, 2.5-pf miniprobe, 2 m (HP 10440A)
1-7. Specifications
Module specifications are listed in table 1-1. These
specifications are the performance standards
against which the module is tested.
1-8. Operating Characteristics
Table 1-2 is a listing of the module operating
characteristics. The operating characteristics are
not specifications, but are the typical operating
characteristics included as additional information
for the user.
1-9. Recommended Test
Equipment
Equipment required to test and maintain the
HP 16532A Oscilloscope Module is listed in table
1-3. Other equipment may be substituted if it
meets or exceeds the critical specifications listed
in the table.
HP 16532A - General Information
1-2