HP 15-cw1000, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 76

2. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-5 Memory module descriptions and part numbers
Description Spare part number
Memory module, 8 GB (DDR4-2666) 937236-855
Memory module, 4 GB (DDR4-2666) L10598-855
Memory module, 8 GB (DDR4-3200) L46598-005
Memory module, 4 GB (DDR4-3200) L83673-005
Before removing the memory, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 27 ).
2. Remove the bottom cover ( Bottom cover on page 27 ).
3. Remove the battery (see Battery on page 29 ).
If you are replacing a memory module, remove the existing memory module:
▲ Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only.
Do not touch the components on the memory module.
Component replacement procedures 33