4.
Remove the tape
(3)
that secures the cable to the computer, and then lift the cable from the
computer.
Figure 6-33
Removing the webcam module cable
5.
Remove the webcam module cable from the computer.
To remove the webcam module:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 26
).
2.
Remove the rear cover (see
Rear Cover on page 27
).
3.
Remove the three Phillips PM20x30 screws
(1)
that secure the webcam module assembly to the
computer.
4.
Lift the webcam assembly up as much as the cable allows
(2)
, and then disconnect the cable
from the module
(3)
.
Figure 6-34
Removing the webcam module
5.
Remove the webcam module assembly from the computer.
50
Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Содержание 100B - All-in-One PC
Страница 1: ...Maintenance Service Guide HP 100B All in One PC ...
Страница 4: ...iv About This Book ...
Страница 8: ...viii ...
