HP Velotechnik GrassHopper Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 72

HP Velotechnik GrassHopper Скачать руководство пользователя страница 6

4

HP

Velotechnik

Load capacity

The maximum load (rider + luggage) is 130 kg
(286 lbs).The maximum total weight (b
rider + luggage) is 150 kg (330 lbs).The lower
limit is valid. It is important to adjust the
spring stiffness of the suspension according to
the load, see the chapter about adjusting the
suspension in this manual,

page 16

.

With an attached trailer, the maximum total
weight must not be higher than 150 kg
(330 lbs)

Carrying luggage

Luggage transport is only allowed with the
special rear rack or lowrider rack designed by
HP V

ELOTECHNIK

.

Maximum load:
Rear rack 25 kg (57 lbs)
Lowrider under the seat 25 kg (57 lbs)

When a rear rack is mounted you have to
make sure that when the rear suspension is
fully compressed there is at least a 1 cm (

1

/

3

")

distance between the rear tire or mudguard
and the rear rack. If you want to increase this
distance you have to decrease the suspension
travel of the rear suspension element with
clip-on spacers. For that purpose please con-
sult your local dealer.

Additional loading can influence the handling of
your bike considerably. If you plan on riding
with heavy luggage we advise you to make a
test ride on a street with no traffic to adjust
to the new situation.

The load should be placed as close to the
body of the rider as possible, since this leads
to a more stable performance.You can also im-
prove the handling of the bike by positioning
the center of gravity of the luggage as low as
possible, so pack heavy items in the bottom of

your panniers. Hang heavy panniers on the
lowrider rack preferably to the rear rack.
Be careful that your luggage on the racks is
safely stored. Bags must be tightly fastened to
the rack so they can not move. In no case may
loose parts like straps or belts touch the
wheels, the derailleur or the suspension.

The rear rack is designed for standard bike
panniers.The lowrider rack under the seat can
be used with special lowrider (front wheel-)
bags.

Take care that your luggage does not cover
the lighting system and the reflectors of your
bicycle and that they stay fully functional.

In case you want to park your bicycle take
care to lean it on a wall or any other solid ob-
ject.With the kickstand alone it is not possible
to safely park a bicycle loaded with luggage, it
could fall down and be damaged.

General Safety Instructions

«
...
4
5
6
7
8
...
»

Содержание GrassHopper









































































Отзывы:

Нет отзывов