HP Velotechnik GrassHopper Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 72

HP Velotechnik GrassHopper Скачать руководство пользователя страница 53

Maintenance and car

e

51

HP

Velotechnik

Seat cushion (BodyLink seat)

The standard seat cushion consists of a 1,4 cm
thick layer of flexible EVA foam.This is a black
material with closed cells that is also used in
the production of high quality camping mats. It
feels very comfortable without appearing too
soft or spongy. It is waterproof so that you can
dry your seat with a sweep of your hand in
case your bicycle has become wet.

For better ventilation, an airflow cushion is
available as accessory.This cushion consists of
several layers:A rigid mesh and a soft mesh,
which provides for an approximately 1 cm
thick air cushion with excellent circulation.
These two layers are wrapped up in a cover
that consists of fine mesh like it is known from
high quality Rucksacks.

You can wash the material at 30° centigrade
and it dries very quickly.

The seat cushion suffers from wear through
constant use.At the parts that are under punc-
tual strain the mesh can be pressed together
permanently. In order to provide a good riding
comfort in that situation the airflow cushion
has additional rigid mesh padding.

Seat Cushion

Caution!

The seat cushion is fastened with

Velcro and you can take it off. For this pur-
pose it is important not to simply grab the
foam and take it off since the Velcro could
come off. In order to take off the seat cush-
ion lift up the upper part a little bit from the
seat.Then you grab the cushion on both
sides together with the end of the Velcro
that sticks out slightly and remove the cush-
ion slowly. In case the Velcro comes off fas-
ten it again with a good glue.

Caution!

Never expose the seat cushion to

extreme heat or focused sunlight.The mate-
rial warms up considerably.The heat may
melt the glue of the Velcro.The seat cushion
can be damaged when the rays of the sun
are bundled through a lens.Take care to nev-
er leave any bubble wrap on the seat in the
sun.The air bubbles in the film act like a
burning glass and shrink the seat cushion.

«
...
51
52
53
54
55
...
»

Содержание GrassHopper









































































Отзывы:

Нет отзывов