HP Velotechnik GrassHopper Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 72

HP Velotechnik GrassHopper Скачать руководство пользователя страница 36

Make sure all cables and electric wires are
long enough to allow proper folding.

The chain tubes are connected by a flexible
rubber joint positioned in the area of the fold-
ing hinge. Grab the both chain tubes at the
rubber joint with one hand and pull them up
and tight to the folding hinge. Move the front
frame half backwards until it rests on the rub-
ber bumper attached to the middle seat quick
release. Secure the folded bike by inserting the
plastic strap into the fastener mounted under
the front frame part.

If you have Above seat steering, secure the
handlebar with the attached velcro strap to
the rear rack or rear wheel.

A shoulder strap and bag for transport of the
folded bike are available as an option for your
GrassHopper fx.

5) Unfolding

To unfold and reassemble your bike, please fol-
low above steps in the opposite order. If your
bike is equipped with under seat steering, plea-
se follow the instructions on

page 14

for prop-

per installation and alignment of the handle-
bars.

Folding (GrassHopper fx)

34

HP

Velotechnik

Danger!

Before riding your bike, make sure

the quick release of the folding hinge is se-
curely closed.The security bolt must be in
its proper lock position.The quick release
lever must be closed in a horizontal posi-
tion. Check that the lever does not obstruct
the steering or the cables of your bike.

Open the quick release lever, then push the quick release down
to unlock the security bolt of the folding hinge.

Folded GrassHopper fx with Above Seat Steering

Folded GrassHopper fx with Under Seat Steering

«
...
34
35
36
37
38
...
»

Содержание GrassHopper









































































Отзывы:

Нет отзывов