HP Velotechnik GrassHopper Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 72

HP Velotechnik GrassHopper Скачать руководство пользователя страница 30

28

HP

Velotechnik

Brakes

The GrassHopper is equipped with a powerful
high-quality brake system.You may choose be-
tween rim brakes and disc brakes. Please do
read the separate manual from the brake man-
ufacturer that comes with your bike for de-
tails.

Make yourself familiar with the braking system.
Remember which lever pulls the front brake
and which the rear brake.

If the arrangement of the levers does not cor-
respond to what you are used to, please have a
bicycle mechanic change it. Please contact your
local bike dealer to find out if there exists any
legal requirement for the arrangement of the
brake levers in your country.

For optimum handling you can adjust the dis-
tance between the brake grip and the handle-
bar with a small hex-headed screw at the grip,
please see the respective manual for details.

Note that the front brake is the most effective
brake on the GrassHopper.With the front
brake, you achieve a much higher braking ef-
fect than with the rear brake.The rear wheel
has a tendency to lock up and slip on the
pavement even under low braking forces.The
braking effect of modern brake systems can be
more powerful than what you have been used
to until now. Do brake carefully.When you
brake too much with the front brake the rear
wheel may lift off the street and the bike may
tumble over.

Do not brake in a bend, always brake before a
bend. Braking increases the risk of slipping.
Especially when it is wet the rear wheel imme-
diately slides out of the bend while braking
and this can result in a serious fall!

If you should hear any unusual sounds while
braking the braking pads might be worn. Do
not use your bike any further until you have
checked the braking pads according to the
manual of the brake manufacturer or ask your
local dealer.

Brakes

Danger!

Please note that the braking dis-

tance is much longer when it is wet or when
the bike is heavily loaded.When riding on
wet, sandy, icy or slippery roads you have to
use the front brake very carefully to avoid
that your front wheel slips. If it does so you
will no longer be able to handle your bike,
which might lead to a serious fall.

Danger!

In case you get into a situation like

that during an emergency stop you have to
let go of the brakes immediately, balance
your bicycle and brake again. If you are not
familiar with the brakes we recommend you
to train at first at low speed and with little
braking effect until you find the correct dose
for an emergency stop.

«
...
28
29
30
31
32
...
»

Содержание GrassHopper









































































Отзывы:

Нет отзывов