HP Autozubehor 75310, Руководство пользователя

Страница: 44 / 101

OBD2 CODE READER
17
OWNER’S MANUAL
$11 Pd 1/6
P0115
Generic
======================
Engine Coolant Temperature
Sensor 1 Circuit
The control module number, sequence of the DTCs, total number of codes
detected and type of codes (Generic or Manufacturer specific, Stored or
Pending codes) will be observed on the upper rig ht hand corner of the
display.
3) If more than one DTC is found, use SCROLL button, as necessary, until all
the codes have been shown up.
If no codes are detected, a "No codes are stored in the module!" message
displays on the screen.
If retrieved DTCs contain any manufacturer specific or enhanced codes, the
display indicates "Manufacturer control".
Use SCROLL button to select a module, and press ENTER/EXIT button.
2) View DTCs and their definitions on screen.
$09 4/6
P1324
Other
=====================
Manufacturer control
4) Press ENTER/EXIT button to return to previous menu.
4.3 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the
code reader to delete not only the codes from the vehicle’s on-board computer, but
also “Freeze Frame” data and manufacturer enhanced data. Further, the I/M Readiness
Monitor Status for all vehicle monitors is reset to Not Ready or Not Complete status. Do
not erase the codes before the system has been checked completely by a
technician.
This function is performed with key on engine off (KOEO). Do not start the engine.
1) If you decide to erase the DTCs, use SCROLL button to select
Erase Codes from Diagnostics Menu and press ENTER/EXIT button.