９
９
９
９
C
-
707
-
13 Die
head
For
stainless steel/steel spokes
Replacement die heads
Die head maintenance
Lubricate rollers with cutting oil every work.
Clean rollers with a brush when cutting scraps remain in roller grooves.
Roller set nut
If the roller set nuts become loose, turn them clockwise
with a 5.5 mm open wrench.
The die head is a consumable part. Even if it is adjusted with the adjust nut, it
may not be possible to roll the correct thread. In that case please replace the
die head. Rollers alone cannot be replaced.
Store the die heads wrapping with the antirust bags (original yellow polyeth-
ylene bags) or after treat with lubricant.
C
-
707
-
14 Die
head
For
stainless steel/steel spokes
C
-
707
-
15 Die
head
For
stainless steel/steel spokes
