４
４
４
４
Operation
Lubricate the roller with cutting oil.
Lubricate each every time to work smoothly
and to create fine thread surfaces.
６
６
６
６
The die will start rotating when the top of the
spoke
approaches.
Apply the top of the spoke to the die head
while the die head is rotating.
Please
thrust
the
holder
for
a
few
seconds
until
the
die
bites
the
spoke.
８
８
８
８
The stopper will come off when the lever is
drawn.
Slide the spoke holder forward the die head
while drawing the lever.
７
７
７
７
Take your hand off the spoke when the spoke
enters into the die and the spoke holder be-
gins to move automatically.
The die rotates reverse and returns to the
original position.
９
９
９
９
*
See “If deadlocked” on page 8 if the spoke
does not advance after bitten in the die head.
Turn the power switch on.
５
５
５
５
