２
２
２
２
These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows :
Warning
…
Notice when incorrect handling could cause the user's death or
serious injury.
Caution
…
Notice when incorrect handling could cause injury to the user or
material damage.
Even if the instructions do not have
Caution
mark, there are some possibilities for
a serious
situation. Follow the instructions.
Warning and caution symbols
Precautions
1
.
Do not wear gloves when operating, since they could get caught in the moving parts.
Loose fitting clothes, wear accessories such as necklaces and long hair could get
caught up in the moving parts.
2. The C
-
701 is not waterproofed. Do not use in place where is extremely damp or
wet. Otherwise, this could cause a fire or an electric shock due to short circuit.
3. Use only with the line voltage specified on the rating plate. Use of voltage higher
rated could cause a
malfunction.
4. Do not bring your hands, eyes, or face close to the moving parts or the cutting area
while the unit is operating. Otherwise this could cause an injury.
5. Always use the genuine dies, otherwise this could cause a malfunction.
6. Always disconnect the power plug from the wall outlet when not in use or before
exchanging the dies. Sudden power input could cause an injury.
Warning
1
.
Wear goggles when using this tool.
2. Do not modify the C
-
701.
3. Do not use when a malfunction is found on this tool.
4. Do not tighten any of the screws and nuts more than necessary.
5. Use the C
-
701 securing in a horizontal and stable place. Otherwise, this could cause
an incomplete work.
6. Please use the die head matching the spoke size. Do not try to use for any other
sizes of spoke.
7. Periodically lubricate and clean dies and all moving parts.
8. Dies are consumables. The degree of wear will vary depending on the frequency
of use.
Caution
