Hoymiles DTU-MI, Руководство пользователя, Страница: 5 / 19

© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
5
DTU-MI-GPRS
3. Introduction to DTU Interface
3.1 DTU Screens
When the DTU completes the start-up process and obtains the IP address, the DTU will start
to operate. During operating, the LCD displays the primary system operation status and
indicates two different pages of info alternately shown below (screens 1 and 2 will appear once
internet configuration completed).
The data indicates:
Page 1:
(1)
Web connection information: “YC” means that the DTU connects to the Internet. If it is
“NC”, the DTU does not connect to the Internet.
(2)
Time, e.g. 10:27:55.
(3)
--XXXX indicates the ID of the current search.
(4)
Local IP address, e.g.192.168.1. XXX.
Page 2:
(5)
It indicates data on the real-time output power in kilowatts, e.g., 0.16kW.
(6)
It indicates data on today’s output energy of the system in kWh, e.g., 0.07kWh.
(7)
The total number of microinverters in this system, e.g., ALL: 05.
(8)
The number of microinverters usually communicating with DTU, e.g., LINK: 01.
(9)
_XXXX, the first two indicate CSQ (IoT card connect Internet signal strength), the last
two indicate Internet transfer status.
3.2 DTU Local Interface
The DTU-MI has an embedded web server, which enables you to view the operation data,
status, and manage the devices and clear fault via browser locally. A computer will be needed
to connect to the same network with DTU, then open the DTU local interface in the browser by
entering the IP address shown on the LCD screen.