Hoymiles DTU-MI, Руководство пользователя

Страница: 14 / 19

© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
14
DTU-MI-GPRS
4.55 Normal Operation
Once the DTU completes the start procedure and obtains the IP address (e.g.,192.168.1.122),
it will start to operate. During the process, the LCD screen displays the basic system operation
status. The below two pages will show alternately (screens 1 and 2 will appear once the Internet
access has been configured).
Note:
- “YC” indicates that DTU communicates with the Internet.
- If it still shows “NC” minutes after connecting to the broadband router, please refer to
“Troubleshooting” on page 20.
4.56 Log in the local interface of the DTU
1)
Connect both DTU and laptop to the local house network.
2) Open the browser on your laptop and enter the IP address displayed on the DTU in the
address bar, press the enter button. Display interface as below.
4.57 Add Microinverter ID
Add all microinverters’ IDs by auto mode or manual mode, referring to “Devices ID Interface” on
page 9-11.
4.58 Check the Communication between Microinverters and DTU
a.
There are two methods to check the communication between microinverters and DTU:
YC 10:27:55 --XXXX
IP: 192.168.1.122
0.00Kw 0.00kWh
ALL:00 LINK:00