Hoymiles DTU-MI, Руководство пользователя

Страница: 16 / 19

© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
16
DTU-MI-GPRS
5. Complete Installation Map
When the system is energized, and the DTU detects the microinverters, you need to complete
the installation map.
a. Peel the serial number label from the DTU and place it on the installation map.
b. Complete system information of the installation map shown as follows.
6. Site creation on HMP
a.
Install Hoymiles Installer APP by searching “Hoymiles” at App Store (IOS) or Play Store
(Android).
b. Open the APP and login in with your installer account name and password. If you are a
new installer with Hoymiles, please apply an Installer account from Hoymiles Technical and
Service Support Team at service@hoymiles.com in advance.
c.
Add Station, select the “Station” tab on the bottom, then select “
⊕
” on the right top side of
the page.
d.
Select “Quick” for Single-DTU and “Profession” for Multi-DTU.
e.
Please fill in the station details accordingly, and press “Next” after completed.
f.
Press “Add DTU ID,” scan the DTU ID (or you can manually input ID) and press “Next”
after complete.
g.
Click “Start binding” and choose the angle and tilt base on the installation.
h. Scan the Microinverter ID (or you can manually input the ID) and click the tick after complete
eac
h ID input. Press “Finish” once all Microinverter ID has been input.