Hoverzon Hoverjet E, Руководство пользователя

Страница: 13 / 26

3.2 PAIRING
Ensure the Hoverjet is fully charged and place it down with the Control Box facing
the ground, before using it.
Before the Hoverjet can be used, it must be connected to the remote. In general, the remote and the Hoverjet
will automatically pair when they are both on. If the pairing is successful, the Pairing Light will turn off.
If an automatic pairing fails, the Hoverjet and remote will attempt to connect automatically for about 30 sec. If
the pairing was unsuccessful, the remote and skateboard will need to be turned off and back on again to start
another automatic pairing.
When not in use for approximately 10 minutes, the remote will automatically turn off.
To use it again, turn the remote back on.
WARNING
CAUTION
11
Hoverzon
TM
Hoverjet E-Skateboard User’s Manual