The H1 has a powerful built-in wireless speakers so you can play your
music while riding.
PAIRING THE SPEAKER
1. Ensure your H1 is turned off. If it is not, please turn off your Hover-1 first
before pairing.
2. Turn on your H1 and the speakers will announce that it’s waiting for
a Bluetooth
®
connection. This will indicate your H1 speaker is now in
pairing mode.
3. Place the H1 and the Bluetooth
®
device to which you would like to
pair it within the operating distance. We recommend keeping the two
devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth
®
is enabled on your phone or music device. Refer
to manufacturer’s instructions for how to enable Bluetooth
®
on your
device.
5. Once you have activated Bluetooth
®
on your device, select the
option “HY-H1” from the list of available Bluetooth
®
devices.
6. If required, enter the PIN code "000000" and confirm the entry.
7. Please note, pairing mode on the Hover-1 will last for two minutes. If
no devices are paired after two minutes, the H1 speaker will
automatically return to standby mode.
8. If pairing is unsuccessful, turn off the H1 first and re-pair following the
aforementioned steps.
NOTE: Once you have paired the H1 speaker with a device, the
speaker will remember this device and will pair automatically when
the device’s Bluetooth
®
is activated and in range. You do not need to
re-pair any previously connected devices.
Your H1 can pair up to two multi-point devices. You can reconnect a
previously paired device without going through the pairing or PIN
process on up to two devices.
LISTENING TO MUSIC
Once the H1 Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Only one speaker will play music as
the other speaker is strictly for safety alerts from your Hover-1. Select
the track you wish to listen to on your device to listen via the speakers.
All volume and track controls will be made using your music device.
Should you encounter any problems while streaming, please refer to
your device’s user manual.
• Slow down at all street intersections and look to the left and right
before crossing.
Your Hover-1 is not equipped with reflectors. It is not recommended
that you ride your bike in conditions of low visibility.
If you are riding your scooter in low-visibility conditions, ensure your
LED lights are turned on, and that you are wearing bright, reflective
clothing.
Think about safety when you ride. You can prevent many accidents if
you think about safety. Below is a helpful checklist for Compact riders.
SAFETY CHECKLIST
• Do not ride “double” with more than one rider on the scooter.
• Avoid riding in large groups, as this can force you to ride too close
to other riders, making it difficult to see other vehicles and road
hazards.
• Do not ride above your skill level. Ensure you have had enough
practice with all functions and features of your Hover-1.
• Do not ride too fast -- with increased speed comes increased risk. If
you are moving at a higher speed, small bumps can turn into large
impacts, leading to a higher risk of injury if an accident occurs.
• Do not ride your scooter with any pets.
• Before stepping on your device, make sure it is placed flat on level
ground, the power is on, and the Running Indicator light is green. Do
not step on if the Running Indicator is red.
• Do not try to open or modify your device, as doing so, voids the
manufacturer warranty, and may cause failure to your device
leading to serious bodily injury or death.
• Do not use the device to place yourself or anyone else and their
property in danger.
• If you and your friend(s) are riding H1 scooters together, be sure to
keep a safe distance between each other to prevent collisions,
property damage, serious injuries or even death.
• Be sure to keep you feet on the pedals at all times. Moving your
feet off your device while driving is dangerous.
• Do not operate the device while under the influence of drugs
and/or alcohol.
• Do not operate the device when you are restless or sleepy.
• Use your best judgment to keep yourself out of dangerous situations
with your device.
• Do not ride your device off of curbs, ramps, or attempt to operate
in a skate park, empty pool, or in any way similar to a skateboard or
scooter. The H1 IS NOT A SKATEBOARD.
• Do not continuously spin in place, it will cause dizziness and
increases risk of injury.
• Do not abuse your device, doing so can damage your unit and
cause failure to the operating system leading to injury.
• Do not ride in or near puddles of water, mud, sand, stones, gravel,
debris or near rough and rugged terrain.
• The device can be used on paved roads that are flat and even. If
you encounter uneven pavement, please lift your Hover-1 over and
past the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads
or in extreme heat.
18
All manuals and user guides at all-guides.com
