The H1 has a powerful built-in wireless speakers so you can play your
music while riding.
PAIRING THE SPEAKER
1. Ensure your H1 is turned off. If it is not, please turn off your Hover-1 first
before pairing.
2. Turn on your H1 and the speakers will announce that it’s waiting for
a Bluetooth
®
connection. This will indicate your H1 speaker is now in
pairing mode.
3. Place the H1 and the Bluetooth
®
device to which you would like to
pair it within the operating distance. We recommend keeping the two
devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth
®
is enabled on your phone or music device. Refer
to manufacturer’s instructions for how to enable Bluetooth
®
on your
device.
5. Once you have activated Bluetooth
®
on your device, select the
option “HY-H1” from the list of available Bluetooth
®
devices.
6. If required, enter the PIN code "000000" and confirm the entry.
7. Please note, pairing mode on the Hover-1 will last for two minutes. If
no devices are paired after two minutes, the H1 speaker will
automatically return to standby mode.
8. If pairing is unsuccessful, turn off the H1 first and re-pair following the
aforementioned steps.
NOTE: Once you have paired the H1 speaker with a device, the
speaker will remember this device and will pair automatically when
the device’s Bluetooth
®
is activated and in range. You do not need to
re-pair any previously connected devices.
Your H1 can pair up to two multi-point devices. You can reconnect a
previously paired device without going through the pairing or PIN
process on up to two devices.
LISTENING TO MUSIC
Once the H1 Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Only one speaker will play music as
the other speaker is strictly for safety alerts from your Hover-1. Select
the track you wish to listen to on your device to listen via the speakers.
All volume and track controls will be made using your music device.
Should you encounter any problems while streaming, please refer to
your device’s user manual.
• Please wear all appropriate safety and protective gear as
previously mentioned in the User Manual before operating your
device.
• Make sure to wear comfortable clothes and flat closed-toe shoes
when operating your device.
• Please carefully read the User Manual, which will assist in explaining
the basic working principles and provide tips on how to best enjoy
your experience.
The first rule in safe riding is to use common sense. A scooter is
vulnerable; it cannot protect you in a crash, against impact, or loss of
control the way driving a car can. It does not have bumpers or
airbags as a car does. This section is a guide of safe riding practices
for on and off-road operation. Make sure you are using your H1
scooter properly.
Different localities and countries have different laws governing riding
on public roads, and you should check with local officials to ensure
you are complying with these laws.
Hover-1 is not liable for tickets or violations given to riders who do not
follow these regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety
standards. In the event of an accident, a helmet can protect you
from serious injury and in some cases, even death.
• Obey all local traffic laws. Obey red and green lights, one-way
streets, stop signs, pedestrian crosswalks, etc.
• Ride with the traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to
pass them from behind.
SAFETY PRECAUTIONS
16
All manuals and user guides at all-guides.com
