5.3 Installation
Caution
Risk of injury caused by falling load and improper handling. During
installation:
– Wear protective equipment (safety helmet, safety goggles, safety shoes).
– Do not stand under suspended loads.
– Use cranes or forklifts with sufficient load-bearing capacity.
Preparation
■
Make sure that the following items are on hand for the assembly:
– Installation platform
– Socket wrench, width 13
■
The installation variant 1 (horizontal unit, retaining brackets facing downwards)
is standard. The screws required for this variant are provided.
■
Additional material is required for the other installation variants:
– Variant 2 (horizontal unit, retaining brackets facing upwards):
M8x55 screws, x4 for TW-2, x6 for TW-3/TW-5
– Variant 3 (vertical unit):
M8x70 screws, x4 for TW-2, x6 for TW-3/TW-5
Installation
Variant 1: horizontal unit, retaining brackets facing downwards
■
Install the retaining brackets
1
on the wall.
– Use the packaging box as a drilling template.
■
Install the unit on the retaining brackets:
– Lift the unit and secure it with the M8 screws
3
.
– Attach the retainer covers
2
.
■
1
Retaining bracket
■
2
Retainer cover
■
3
M8x20 screw with washer
Fig. 8: Horizontal installation with retaining brackets
facing downwards
10
TopVent
®
TW
Design, installation and operation
Transport and installation
4 216 285-en-02
