6.5 Connection module
The connection module is available in 4 lengths for adapting the RoofVent
®
unit to
local conditions.
6.6 Design with 2 Air-Injectors
A supply air duct can be connected to the RoofVent
®
unit for distributing the supply
air over a very wide area. 2 Air-Injectors can be installed on this. The supply air
duct and the cabling must be provided by the client.
Fig. 10: RoofVent
®
unit with supply air duct and 2
Air-Injectors
6.7 Design without Air-Injector
RoofVent
®
units in the design without Air-Injector are suitable for connecting to an
air distribution system supplied by the client.
Fig. 11: Connection to an air distribution system
supplied by the client
6.8 Paint finish of below-roof unit
The entire below-roof unit is painted in any colour. If the below-roof unit is
equipped with a supply air silencer, this is also painted.
RoofVent
®
RH | RC | RHC | R
Options
Art.No. 4 214 745-en-04 / Page 25
