7.
Close the boiler flange with the burner again.
8. The oil lines can be routed through the absorber hood
on the right or left side.
9. Establish the plug-in connections (4, Fig. 08). Pull the
plug cables out further by releasing the high-strength
cable glands (5).
-
The burner must be connected to the boiler with the
standard plug-in connection.
-
The burner cable must be shortened so that the
plug-in connection has to be parted to swing out
the burner.
4
5
Cable outlet
to the left
Cable outlet
to the right
4
Fig. 08
10.
Replace absorber hood (1, Fig. 02), attach with lo
-
cking bolt (approx. ¼ turn to the right).
Further information can be found in the
instructions supplied with the burner.
7
4 213 784 / 00
ASSEMBLY
Содержание 41-UltraOil 16
Страница 35: ...35 4 213 784 00...