background image

13

Maintenance

WARNING: Unauthorized machine modification or 
use of non-approved replacement parts may cause 
personal injury and/or property damage and will 
void the manufacturer warranty.

Pump

Use Hotsy Pump Oil (8.914-527.0) for pump crank-
case. Crankcase must be filled to the full mark on the 
dipstick or to center of sight glass window found on the 
rear of the pump. During the break-in-period, make 
sure the oil is changed after the first 25 hours of opera-
tion. After that, replace oil every 3 months or 300 hours 
of operation, whichever comes first.

Proper Pump Care:

Do not pump acids.

Do not allow pump to run dry.

Winterize if storing in freezing temperatures; 
refer to 

Storage

 for details.

Use a water softener on the water system if 
known to be high in mineral content.

Use only high quality detergents and follow 
manu-facturer’s mix recommendations.

Flush the system with clear water immediately 
after using detergent solutions.

Clean filter screen on detergent inlet line peri-
odically.

Flush the pressure washer system with anti-
freeze if storing for an extended period of time; 
refer to 

Storage

 for details.

Pump Motor

On a yearly basis, oil pump motor per instructions on 
motor nameplate.

NOTE: Some motors may be equipped with perma-
nently lubricated bearings and will not require addi-
tional lubrication.

Unloader Valve

WARNING: The unloader valve on this pressure 
washer has been factory set and sealed and is a 
field nonadjustable part. Tampering with the 
factory setting may cause personal injury and/or 
property damage, and will void the manufacturer 
warranty.

HOTSY •  CWC OPERATOR’S MANUAL • 9.801-695.0-B

Dip

s

tick

Sight Gla

ss

  

(on Rear of Pump)

Oil Fill

Содержание CWC-53























Отзывы: