Copyright 2013 HotSpot Energy
28
AC Backup & Generator Start Function
Configure one or more channels to control a generator. With the flexible parameters of this
Function, the user can control 1, 2, or 3-wire schemes. Refer to the generator documentation for
required signals, timing, and operating specifications.
This section provides a brief setup overview. Refer to the Relay Driver GenStart Supplement for
detailed wiring and configuration details.
The document is available on the Morningstar website at:
http://www.morningstarcorp.com/en/support/library/RD.IOM.Operators_Manual.01.EN.pdf
WARNING: Incorrect configuration or incorrect installation may result
in personal injury, death, or damage to the generator and/or other system
components.
CAUTION: Configure the Relay
Driver first before wiring
the generator control
WARNING: Remote generator
control should only be configured and
installed by experienced professionals.
