AUTO OPEN SERIES
AUTO OPEN SERIES
PAGE 11
PRESS
Once your equipment has reached the designated temperature:
Position the garment and application and proceed to press.
Lower and lock the heat platen into the press position.
This procedure will start the automatic timing process.
The timer will automatically count
down and lift the heat platen into the “UP”
position when the press cycle is complete.
NOTE:
Please be aware after time
is complete, gas shocks will
automatically release the platen
into the “UP” position.
The time will automatically re-set
and you are ready to continue
with the next application.
Pressing
6.
