AUTO OPEN SERIES
AUTO OPEN SERIES
PAGE 9
ADJUST THE TIME
Your Auto Open, 6 x 6 Press has two time settings. This will allow you to set different times when a two hit
application is required. For single hit applications, you simply set both time settings the same.
Once you have adjusted the temperature, press the Mode Select button again. This will advance you to the Time
#1 mode. The set and time lights will illuminate, indicating that you are in the Time # 1 mode.
Adjust the time in the same manner that you adjusted the temperature. Once you have the Time # 1 set, push
the Mode Select button again to advance to the Time # 2 setting. All three red LED lights will illuminate
indicating that you are in the Set Time # 2 Mode. Select the desired time and push the Mode Select button
again to exit the time settings. All lights will be off and the press will return to the print mode.
REMEMBER:
Press the Mode Select button
ONCE to advance to the Adjust
Temperature Mode
Adjusting the Time
4.
Press the Mode Select button
A SECOND TIME to advance to
the Time #1 mode.
Press the Mode Select button
A THIRD TIME to advance to
the Time #2 Settings.
Press the Mode Select button
A FOURTH TIME to return to
the Heat Up/Operating Mode.
