Safety
●
The laundry process
For washer
the
of fabrics. To
.
not leave washer lid up
avoid such a result, the garment
during cycle. This will stop the
manufacturer’s care instructions
wash and spin action and prevent
should be followed very
completion of the cycle.
How to operate your clothes washer
reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY
before operating this appliance.
MultiSpeed
Sorting and
Setting the controls.
Select Wash/Spin Speed.
●
Sort clothes
by fabric
See the Controls Setting Guide on
Push Cycle Selector Knob in
type,
weight, color and amount of
6 and 7.
and turn clockwise to your selected
S-oil. See instructions on page 11.
●
Load clothes into the wash basket
being careful not to overload.
●
Add measured detergent to wash
load.
●
See page 8 for Bleach Dispenser
and Fabric Softener Dispenser
instructions.
●
Refer to pages 11 to 17 for more
information on loading clothes,
detergents, and other laundry
products.
●
Close lid. Washer will fill but not
agitate or spin with lid open.
Wash/Rinse Temperature.
Select Water Level.
LOW: Washer is less than 1/3 full
of clothes.
VANABLE: Any level of fill
between Low and Full.
FULL: Washer is more than 2/3
full of clothes.
RESET: To increase level, turn
knob to “RESET” and then to
new level.
See page 9.
wash setting.
Pull Cycle Selector Knob out
to start the washer. If you wish to
change setting after washer has
started, push Cycle Selector Knob
into stop the washer and reset to
the new position. Setting can be
changed at any time.
4
