PROBLEM
POSSIBLE CAUSE
—
WATER WON’T
●
Make sure drain hose is not kinked.
DRAIN
Top of drain
should be less than 8 ft. above floor.
WATER LEAKS
Make sure hose connections are tight at faucets.
●
Make sure end of drain hose is correctly inserted in and secured drain facility.
WASHER IS NOISY
●
Make sure washer is level and firm to the floor with rubber foot pads in place and
front jam nuts tight. See your Instigation Instructions.
A sharp distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission “locks
This sound is normal.
●
unbalanced loads can cause the washer to vibrate excessively during spin,
and may cause it to move from its original position. In extreme cases, (usually occurs
when washing a single, heavy item or a small load when water level is set higher than
necessary) the spin basket may strike the outer tub, creating a loud but
noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart.
WASHER PAUSES
●
Washer normally pauses between washing steps. . such as between wash and spin or
IN
between spin and rinse.
If you need more help.. call, toll free:
The GE Answer Center”
800.626.2000
consumer information service
25